How to remove 502 glue

Glue is very common, and there are many types of glue. You cannot choose glue at random. Different glues have different effects. Therefore, before choosing glue, you must have a good understanding of it, so that you can use it with confidence. 502 glue is very common. This kind of glue is very helpful for sticking some small objects. How to remove 502 glue?

When many people use 502 glue, it is easy to get it on their hands and clothes. In this case, it is necessary to remove the 502 glue. Therefore, you should pay attention to the method selection. How to remove 502 glue?

How to remove 502 glue:

How to remove 502 glue from your hands

The first one is the simplest one. Just apply a wet towel to the glue stain. After a period of time, 02 will become soft and you can wash it off.

(If you get glue stains on your hands, you need to know how to do it)

The second method is to use the same 502 to melt the area stained with 502 glue, and remove it after it becomes soft.

The third method is to use insulating oil. Insulating oil works very well. 502 glue can soften quickly and then be washed off directly.

The fourth method is to use acetone, but you must be careful when using acetone. Acetone is somewhat toxic and can cause great irritation to the eyes. If it accidentally enters your eyes, rinse immediately with plenty of water. You can use a dilute sodium bicarbonate solution for cleaning.

Fifth, you can also soak it in hot water for 5-10 minutes.

How to remove 502 glue from clothes

When using 502 glue, clothes will undoubtedly be easily stained with glue. So how to wash off the 502 glue on clothes? What are the methods?

The first method is to drop some banana water on the 502 glue stains on the clothes, and then use a brush to brush the glue stains continuously. After a period of time, the glue will soften and fall off the clothes. Then rinse with clean water and then dry it. (Be careful when your clothes get glue stains)

The second method is that the solvent of 502 glue is acetone. As long as the clothes stained with 502 glue do not contain acetate fiber, they can be cleaned with acetone. If 502 glue sticks to acetate fiber, the fiber will be dissolved and holes will be caused. When using acetone, you must be very careful about the usage method:

a. First, turn the clothes over and place toilet paper or other absorbent materials under the stain.

b. Drop acetone around the stain and dissolve it gradually from the outside to the inside. If you think the speed is too slow, you can also put a layer of cloth on it and gently squeeze and tap it.

c. Replace the adsorption material and repeat the above steps until all the adsorbent is dissolved.

The third method is to use the same 502 to melt the 502 glue stains on the clothes, and then quickly wash them off with water.

The fourth method is to use insulating oil, but it is difficult to find insulating oil. It is usually found in transformers. Insulating oil is very effective. The 502 glue can soften quickly and can be washed off directly.

Fifth, in fact, if only a small area is stained with 502 glue, soaking it in hot water can also achieve the effect of removal. Of course, if a large area is stained with 502 glue, you must apply acetone. This is the best removal method.

Through the above introduction, we have a good understanding of how to remove 502 glue. Following the above method can greatly improve this problem. However, it should be noted that when removing such glue, it cannot be done forcibly, as this will cause some damage to all aspects of oneself.