How to clean stains on the surface of leather shoes

Leather shoes need to be maintained regularly, but after wearing for a long time, they will inevitably become damaged. In this case, they cannot be washed with water, as this will not only cause the leather to peel easily, but also cause mildew. If we want our leather shoes to become shiny again, we need to use some tricks to clean them, and the effect is no less than that of a shoe cleaning shop. So, how to clean stains on the surface of leather shoes? Let’s take a look at the method below.

Stains on leather shoes can be treated by cleaning. Leather shoes cannot be soaked in water. They cannot be directly put into water for cleaning like canvas shoes. Leather shoes can be cleaned with leather shoe care agents, brushes, sponges, and shoe trees. The steps for dealing with stains on leather shoes are as follows:

1. Use a shoe tree to support the shoe. The wooden shoe tree can change with the shape of the shoe.

2. To remove dust, use a vacuum cleaner and a damp soft towel.

3. Use a special brush, and pay attention that the copper wire side should mainly deal with the areas with heavier stains and polished areas. First, brush in one direction with the rubber side, use the side surface for the seams, focus on rubbing the stains in circles, and then rub with the copper wire.

4. Wipe with a damp sponge to wet the upper, the purpose is to mainly deal with water-soluble substances.

5. Shake the detergent evenly and spray it on the surface. Use a rubber brush to brush back and forth repeatedly to remove all stains on both sides of the fiber. Use a damp sponge to absorb the dirty foam.

6. Let it air dry for more than ten minutes. When the fur is slightly dry, use the rubber side to brush it in one direction while it is still damp to spread out and tidy up the fur.

7. Let it air dry for half an hour. After the shoe surface is dry, stuff newspaper inside the shoe for protection. Spray the renewal agent evenly 15 cm away from the shoe. The renewal agent contains brightener, colloid to enhance the adhesion of other substances, pigment, solvent-soluble mixed substances, etc. The purpose of spraying the renewal agent is mainly to replenish color.

8. After drying, use a rubber brush to make the color uniform.

How to deal with stains on leather shoes, some common sense for leather shoe maintenance: each pair of shoes should not be worn continuously for too long, and the shoes should be placed in a sunny place to dry when not worn. Leather should not be immersed in water. If it is immersed in excessive water, salt frost will appear, which will affect the extensibility and resistance of the leather. The leather will feel hard when worn again and the shoes will easily deform.

Don't share your leather shoes with others, otherwise they will be obviously deformed. This is because people's feet are different, and the shoes will tend to be consistent with the shape of the feet after being worn for a certain period of time. If you find frosting on your leather shoes, you can use gauze or cotton dipped in a small amount of warm water to wipe off the white frost on the shoe surface, place it in a ventilated place to dry, and then apply a small amount of shoe polish to preserve it.