What is the function of solar scale cleaning agent

Solar energy is a necessary bathing appliance in the home, which can bring us great convenience. However, after using solar energy for a long time, scale will easily accumulate inside, so regular cleaning should be done. Solar scale cleaner can effectively clean these dirts, but I hope everyone can understand the correct usage method and some precautions.

1. Three methods of solar anti-scaling and descaling:

(1) A magnesium rod with a descaling function was added during installation. However, it had little effect. Even the magnesium rod itself was scaled up. There was no difference between installing it and not installing it.

(2) Add a descaling agent. I do not recommend this method. Common descaling agents are acidic or alkaline, which will corrode the inner liner of the water tank. In addition, the scale in the vacuum tube cannot be completely removed. The tube must be removed and the scale must be poured out after 24 hours.

(3) Physical descaling method: unplug the vacuum tube and expose it to the sun for two days, then install it. Before installing the tube, fill water into the solar energy tank indoors to remove the scale in the water tank. This method will not cause damage to solar energy, save money, and remove scale thoroughly.

2. Main Ingredients

Food acid, synergist, metal material protective agent Function: Quickly and thoroughly clean the scale on the inner wall of solar panels and vacuum tubes.

Advantages: It uses food-grade raw materials, has no harm to the human body, and can be used directly after cleaning;

3. Usage :

1. Open the water inlet;

2. Mix this product with water in a ratio of 1:10 (volume ratio) to make a cleaning solution and add it to the water storage tank; for stubborn scale, pour the original solution directly and soak for 5-15 minutes to easily disintegrate the scale.

3. Allow it to automatically heat cycle for 20-30 minutes and drain the cleaning fluid directly from the drain;

4. Open the water inlet, fill it with water and then circulate it for two minutes;

5. After draining, it can be used normally

Note : If it comes into contact with sensitive parts such as eyes and nose, please rinse with clean water.