What is the procedure for using an IV infusion pump?

I believe everyone has had the experience of infusion. For example, if you have a long-term cold, you can go to the hospital for infusion treatment. Under normal circumstances, people's infusion is relatively simple and does not require the cooperation of other machines. But for some special patients, such as infants and young children, ordinary infusion methods are ineffective. At this time, the help of an infusion pump is needed. The following introduces the correct use of an intravenous infusion pump.

Intravenous infusion pump usage process:

Understand the purpose of infusion pumps. An infusion pump is an auxiliary tool for accurately delivering liquid medicine into the human body and is the most ideal advanced medical equipment for continuous infusion work. Correct operation and use of the liquefaction pump can not only accurately provide different drug delivery speeds according to the different physical conditions of the patients, but also greatly reduce the workload of medical staff, make medical work more accurate and effective, and achieve the best level of treatment and care.

The structure of the infusion pump includes a microcomputer system, a pump device, a detection system and an alarm device. The microcomputer system of the infusion pump controls and processes the entire system; the pump device is the power source for infusing liquid; the detection system is mainly used to sense different signals and transmit them to the microcomputer system; the alarm device has two modes of display: light alarm and sound alarm when the microcomputer issues an instruction.

Let me introduce to you the operating procedures of the infusion pump. First fix the infusion pump on the infusion stand and turn on the power. Then open the pump door, install the infusion pipe at the lower end of the dropper on the clip of the infusion pump from top to bottom in the appropriate position, check the pump door, and open the spiral clamp of the infusion set. Then turn on the power button on the back of the infusion pump, select the infusion device, set the infusion volume, tassel and drip rate per minute. Press the "Start" button to start the infusion, and press the "Stop" button to stop the infusion after the infusion is completed. Finally, open the pump door, take out the infusion tube and close the pump door. Turn off the power switch and unplug the power plug. This is the entire operation process of the infusion pump.

Finally, the usage of the infusion pump is introduced. Pay attention to the methods and techniques when using the infusion pump. For example, use the infusion catheter dedicated to the infusion pump. When connecting the liquid, be sure to exhaust all the air and clamp the catheter. When starting an infusion, remember to observe whether the infusion procedure is proceeding correctly. When removing the infusion tube, you need to turn off the power first, then wipe the infusion pump and put it aside for use. If the infusion pump is not used for a long time, it also needs to be charged once a week and placed in a dry place.