What is the production process of fake jade?

Jade jewelry is very popular. Jade is a type of jade. Real jade of qualified quality looks very good, has beautiful color, and is relatively expensive. However, in today's society, various kinds of fake jade have appeared. For those inexperienced people, it is impossible to distinguish the real jade from the fake jade with the naked eye, so they are often deceived. Let's take a look at the production process of fake jade.

Fake jade production process:

① Color Fake

A. Dyeing and coloration. Adding organic dyes into jade by heating is called dyeing.

B. Color starting: Heat the jadeite with good water to 212 degrees and then soak it in chromium salt solution for 2 hours. The chromium salt will penetrate into the jadeite lattice and make it appear beautiful green. **, Coated Jadeite: Use organic green dye to apply on the surface of jadeite jewelry. It also means "put on clothes".

C. Brightening without polishing. Jade jewelry is not polished, but sprayed with a layer of green or colorless brightening paint.

② Raw materials are fake:

A. Second layer of stone: the main stone is inferior jade raw material, and a layer of jade flakes with good water content and color is glued on the cut.

B. Three-layer stone: the main stone is low-grade brick material, with a thin piece of green glass glued in the middle, and a thin piece of colorless jadeite with good water content glued on it.

C. Artificial skin is made when green cannot be found or the bottom is bad, or when gambling on stones is lost and the jade is glued on again. The same mud, sand and glue as the skin is mixed on the surface of the jade raw material.

D. Artificially drill holes in jadeite, make holes near the surface of jadeite, put green substances into the holes, and then seal the holes so that people can see the green inside from the surface.

E. Burning jadeite. After the new jade is burned by fire, it becomes unclear and can be regarded as old jade.

F. The cutting marks made by humans make it look like a washboard, which prevents light from entering and makes it difficult to observe. This is mainly due to the dirty bottom, poor water and many cracks.

③ Use other green jades and artificial green ornaments to pretend to be green.

Be more careful and take a look at the production process of fake jade. How does wearing fake jade cause cancer?

1. Bracelet raw material cutting machine

2. The raw materials of the bracelets after cutting are spread all over the ground. They are stone materials without color, base or water.

3. Use strong acid and other chemical agents that are extremely harmful to the human body to soak the stone for more than half a month.

3. The effect after soaking with chemical agents.

4. Artificially add color to the washed stone

5. Enter the vacuum high-pressure glue injection machine and inject glue again with highly toxic chemicals

6. Open the sealed can after the injection is completed

7. Those colorless, qualityless and waterless stones have been transformed into high-quality jadeite with excellent quality, color and water.