How to remove the glue on the table?

People often use glue to stick things together. Some glues have very high viscosity, for example, they can stick things tightly to the wall. However, if you are not careful when using glue, it will often get on your clothes or on the table. Glue on the table will leave very obvious marks, and they cannot be washed off by ordinary methods. At this time, you can try these methods to remove them.

How to remove the glue on the table?

1. Use nail polish remover to remove tape offset prints. Just use a paper towel to apply some nail polish remover and wipe the area with the offset prints.

2. Using a hair dryer to heat is also a good way to remove offset printing. After heating the offset printing with a hair dryer, the offset printing will become soft, and then you can wipe it off with a cloth. This method requires that the surface of the object to be pasted must be heat-resistant and the offset printing area must be small.

3. Alcohol has a diluting effect, so using alcohol to remove tape offset is also a good method.

4. Erasers are very helpful for removing small areas of tape marks. When you first erase it, it will turn black, and then continue to wipe it to remove the tape marks.

5. Computer cleaners and adhesive removers can both remove tape offset marks. Adhesive removers are very effective for large areas of tape offset marks that are difficult to remove.

It mainly depends on what kind of glue is used and the material of the desktop. Usually, you can consider sprinkling some sesame oil, vinegar, toothpaste, flour, etc., mainly considering the material of the desktop itself. After it is fully penetrated, soak it in hot water, and then wipe it with a scraper or toothpick, and you're done!

1. Remove nail polish remover

First, soak the offset printing with warm water, and then apply a small amount of deglazing water on the rag. Wipe the offset print back and forth with a rag and it will soon become lighter.

2. Vinegar

You can first soak the offset with warm water, and then pour a small amount of vinegar on a dry rag. Use a rag to rub the offset printing, and it will come off slowly.

3. Steel wool

Dip the steel wool in a small amount of water, find a spot on the offset printing and start rubbing it slowly. It will fall off soon.

4. Dishwashing liquid

After soaking the offset, you can apply some dishwashing liquid. Then wipe it with a dry cloth, it will be easier.

5. Wipe with alcohol

Pour a small amount of alcohol or non-drinking wine and wipe it with a rag. Wipe quickly as the alcohol evaporates more easily.