Automatic water dispenser

As the development of modernization is constantly accelerating, people's living standards are constantly improving, and people's demands for life are also constantly improving. It is precisely because of this that people will think about how to make themselves the most convenient, and this automatic water dispenser is one of them. This is also a good choice for everyone, and I hope everyone can make good use of it.

As for this kind of automatic water dispenser, there are actually many varieties in society, and people use it quite frequently. Here is some information about this kind of automatic water dispenser.

Working principle of water refrigeration

1. Press the refrigeration switch, the power is turned on, the green refrigeration indicator light turns on, and the compressor starts running.

2. The operation of the compressor can absorb the refrigerant vapor that has absorbed heat and vaporized in the evaporator, and compress it together into high-temperature, high-pressure gas, and send it to the condenser.

3. The refrigerant vapor dissipates heat to the outside through the condenser and condenses into high-pressure liquid. This condensed liquid then flows into the evaporator through capillary throttling and pressure reduction, absorbing heat from the refrigeration tank. The absorbed heat is the normal temperature water and electricity heat, which gradually reduces the water temperature. The refrigerant liquid is then sucked back by the compressor.

4. The above is a complete refrigeration process, but generally this process needs to be continuously circulated to truly achieve the purpose of cooling.

5. When the water temperature drops to the set temperature over time, the refrigeration thermostat contacts are disconnected, the refrigeration green indicator light goes out, the compressor stops, and the system enters the insulation state.

6. After power failure, the water temperature gradually rises. When it reaches the set temperature, the refrigeration thermostat contacts close, the green indicator light turns on when the power is turned on, and the compressor starts running. Repeat this cycle to control the water temperature between 4-12℃.

Working principle of water heating machine

1. Press the heating switch, turn on the power, the heating circuit is connected, the red heating indicator light is on, and the electric heating tube heats up.

2. When the water temperature rises to the set temperature, the automatic reset thermostat automatically cuts off the power supply, the red heating indicator light goes out, and the system switches to the insulation state.

3. After power failure, the water temperature gradually drops. When it drops to the set temperature, the thermostat contacts close, the power is turned on, the red heating indicator light turns on, and the electric heating tube heats up again.

4. According to the above heating method, the water dispenser can control the water temperature between 85-95℃ through continuous circulation.

Water dispenser working temperature insurance device

There is usually a temperature insurance control device in the compact refrigeration water dispenser, which can play a protective role according to the temperature changes. When the circuit is overheated, the protection device will automatically fuse or disconnect the circuit when overloaded, providing safety protection.

Through the above understanding and introduction, I believe everyone can have a certain understanding of this automatic water dispenser. At the same time, I also hope that everyone can be helped by the above knowledge. At the same time, I also hope that everyone can read more related books to enhance their knowledge level, and do more of these practical things in daily life.