What is the correct way to use adhesion promoter?

In daily life, people often use tape. There are many types of tape now, but no matter which one, there is adhesion promoter on it. In fact, adhesion promoter is widely used in both industry and life. Adhesion promoter can be used on glass, metal, rubber, plastic and other materials, which can make the materials stick more firmly. So how to use adhesion promoter correctly?

First, how to use adhesion promoter

Directions:

1. Clean the place where you want to stick the sticker, make sure the surface is dust-free, water-free and oil-free. It is recommended to wipe it with alcohol or high-concentration liquor.

2. Unscrew the bottle cap with the brush and do not put too much liquid on the brush.

3. Because this product is very volatile, please press the bottle mouth tightly after taking out the brush.

4. Use a brush to apply the adhesive to the area where things need to be pasted. Let it dry for 1-2 minutes before sticking.

5. Peel off the red paper tape and stick it on the desired location.

6. Use a small roller to roll vigorously on both sides of the adhesive to ensure a tighter adhesion.

Second, matters needing attention

1. Children are not allowed to use this product!

2. Do not contact eyes. If contact occurs, wash with water immediately and seek medical attention immediately.

3. According to the research conducted in California over the years, long-term exposure can cause cancer.

Third, note:

1. Before applying, please test on a small area whether this product reacts chemically with the object to be applied. However, it does not produce chemical reactions on surfaces such as car paint, plastic, glass, and metal, so please feel free to use it.

2. The adhesion promoter is a highly volatile 3M base glue, so be sure to pay attention to the sealing when using it. It is best to press the bottle mouth tightly immediately after taking out the brush. Tighten the cap tightly after use! !

3. The adhesion promoter has a certain viscosity in its initial state.

4. Adhesion promoter is not a cleaning fluid, please do not use it incorrectly. Not for use by children! Keep away from eyes and skin. If contact occurs, wash immediately with water. If serious, go to hospital immediately

Fourth, should the adhesion promoter be applied on the car or on the 3M tape?

1. Apply adhesion promoter on 3M tape.

2. Adhesion promoters are mainly used for surface pretreatment of some low surface energy materials. They increase the initial adhesion of the tape when it is pasted. They are especially suitable for acrylic foam tapes.

3. 3M is recognized worldwide as the top brand in the adhesive tape industry. 3M Industrial Tape and Adhesive Products Division is affiliated to the Industrial and Transportation Products Division of 3M China Co., Ltd. The Industrial Tape and Adhesive Products Division has always been committed to continuous innovation, enabling it to have cutting-edge technology, advanced production lines and a strong professional technical support team in industrial tape and adhesive products. 3M has a complete range of industrial tapes and adhesives to meet the various needs of different customers. Its main products include double-sided tapes, labels, VHB tapes, adhesives, masking tapes, packaging systems, protective films, and other special single-sided tapes. At the same time, it can also provide professional solutions for these products. These products are widely used in electronics, automobiles, home appliances, construction, aviation, shipbuilding, sporting goods, furniture and other industries.